雷顿三坐标测量仪上海蓝鸿计量仪器有限公司

气动量仪（气动测量仪）施泰力影像测量仪万濠投影仪新天施泰力投影仪万濠影像仪影像测量仪(影像仪）思瑞三坐标测量仪海克斯康三坐标测量机三坐标测量仪球栅尺（数显附件）光栅尺,磁栅尺布氏硬度计维氏硬度计硬度计轮廓仪测长仪测长机工具显微镜其他量具量仪粗糙度仪圆度仪，圆柱度仪测高仪光谱仪金相显微镜&制样设备超声波探伤仪测量仪器维修保养刀具预调仪

您现在的位置：上海蓝鸿计量仪器有限公司 > 产品展示 > 雷顿三坐标测量仪

雷顿三坐标测量仪

Tornado
NCA564
Tornado系列—自动测量机的精品
Representative Of Coordinate Measuring Machine
移动桥式三坐标测量机
Moving Bridge
Coordinate Measuring Machine

产品名称 Product：移动桥式三坐标测量机

产品规格 Model：NCA564

技术描述 Technical Description:

A.主机 Machine：

Tornado系列三坐标测量机是LEADER公司21世纪最新一代移动桥式测量机。

Tornado series is the latest generation of Moving Bridge style high accuracy high speed Coordinate Measuring Machine from LEADER

Tornado测量机集单点探测和模拟扫描技术为一体的高性能检测设备，可选配同时安装接触式和非接触扫描测头。基于新一代高稳定性控制系统，并与精度补偿系统进行结合与优化，加上先进的算法，可实现高速、高精度模拟开环以及闭环扫描。

Tornado serials combines single-point probing and analog scanning in a single high performance measuring machine also can equipped with contact and non-contact probe system. Based on the new generation of controller combines and optimizes temperature and accuracy compensation systems and advanced algorithms to support high-speed, high-accuracy analog open and closed loop scanning.

结构特点 Design Characteristic

- 固定花岗石工作台，X、Z轴采用超高刚性航空铝技术，通过减轻运动负荷从而提高了整机的性能，

是保证稳定性和刚性的最佳结构设计。

- 测量机主导轨采用槽型截面设计，空气轴承按封闭式静压导轨布局，增大了气膜刚性，提高了Y向气浮导轨的精度

- 高精度高气膜刚性的自清洁式预载荷气浮轴承-三轴均采用大功率驱动器、电机及新型双级带减速器，确保传动准

确，迅速。

- 英国Renishaw进口光栅尺、读数头、测头、测针、控制系统。

- 德国FESTO气动系统Z轴气动平衡，可靠、平稳提高定位精度，并具有自保护装置，提高了Z向的运动特性。

- 日本SMC精密过滤系统，确保导轨长寿命

- 德国GATES柔性钢丝同步带传动，克服了磨擦杆、齿轮齿条、钢带等传动的诸多缺点，无滑差、噪音、高柔性

- Granite fixed worktable, X&Z axis beam has aviation aluminum technology. This structure is the best solution to lighten main carriage’s weight and improve main carriage’s stability and rigidity, so can greatly improves CMM’s performance.

- Granite worktable with integral “dovetail” guide in Y axis, eliminate the pitch and yaw ,also provides superior motion stability.

- Z axis air-balance with self-protection ,improve motion capability.

- Advanced synchronous belt drive system with non-slip and high stiffness, ensures high stabilit, lower noise.

- High precise, rigid, and pre-loaded air bearings on all axes, can ensure the guidance never be damped

- Transmission system uses high-power DC servo motor and new double level tape reducer to ensure rapid and accurate axes

- RENISHAW steel scale

- Famous parts from all over the world are used in every important sub systems

性能指标 Performance Specifications

行程范围(mm) Measuring Strokes			外形尺寸(mm) Overall Dimension				主机重量 (Kg) Machine Weight	被测工件最大重量 (Kg) Max. Part Weight
X	Y	Z	Lx	Ly	Lz
500	600	400	1100	1340	2240		700	500
精度指标：（根据ISO10360-2坐标测量机的性能评定标准）(Accuracy is according to ISO 10360 – 2)
最大允许示值误差MPE_E (μm) Maximum permissible error of indication of a CMM for size measurement (μm)						最大允许探测误差MPE_P (μm) Maximum permissible Probing Error (mm)
2.1 + 3.3L/1000						2.2
动态性能Dynamic Performance
3D运动速度(mm/s)　3D positioning speed						3D运动加速度(mm/s²) 　3D acceleration
750						1800

环境条件要求 Environment Specifications:

测量机室温度要求：Room Required Specifications
房间温度 (温控间) Room Temperature	18～22°C
温度梯度(时间) Temperature Gradient (in time)	1°C /h
温度梯度(时间) Temperature Gradient (in time)	2°C /24h
温度梯度(空间)Temperature Gradient (in the volume)	1°C /m
测量机室湿度要求：Humidity Required Specifications
空气相对湿度 Relative humidity	55-65％
气源要求：Air Supply System Required Specifications
最小供气压力 Min. air pressure	8 bar [0.8 MPa]
耗气量Air consumption	0.12-0.45m³/min
电源要求：Electrical requirements
电压Voltage	220 V ± 10%
频率Frequency	50/60 Hz
最大耗电量 (Max Power consumption)	1500VA
电流Current	15 A
允许的最大的地面振动 Allowed Maximum Floor Vibration
频率范围 (Frequency Range)	0 ~ 19 Hz 19~75 Hz > 75 Hz
振幅 (Maximum Amplitude)	0.0011 mm 0.0011~0.002 mm 0.002 mm
用电设备要求接地可靠：接地电阻小于4欧姆 A good earth ground (less than 4 W) is required for reliable operation of the electrical controls.

备注：满足环境条件要求的方法具体可参考《机房施工指南》

Note: The Site Preparation Guide will help customer to know how to reach the Room Requirements.

上海蓝鸿计量仪器有限公司

网站安全修复：亿欧软件